Automatic KMS Activator for Windows Operating Systems VL editions: Vista, 7, 8, 8.1, 10, Server 2008, 2008 R2, 2012, 2012 R2 as well as Office 2010, 2013, 2016.
In addition, the program activates:
Windows 8.1 Single Language;
Windows 8.1 Core;
Windows 8.1 Core N;
Windows 8.1 Pro WMC;
Windows Embedded 8.1 Industry Pro;
Windows Server 2012 R2 Standard;
Windows Server 2012 R2 Datacenter.
Based on the KMS Server Service of mikmik38 (MDL).
You have to know
Run KMSAuto Net.exe as administrator and use the interface. If you need additional functionality, enable Professional Mode. The Professional Mode On / Off button is located on the “About” tab.
The easiest way to use the program is to choose the automatic mode. All you need to do is press the button if you want to activate and accept the create a task programmed to reactivate when you press the button.
Tip: First you need to activate Windows and Office in manual mode, and only then, when you are sure that the activation is carried out, you can create a scheduled task for the reactivation of products every 25 days.
If the system does not want to activate in Professional Mode go to “Utilities” and manually install a GVLK key for the appropriate Windows Edition, and then try to activate again.
To activate Windows 8.1 the TAP network adapter must be installed directly and use the IP address 10.3.0.2-254 or use the special driver. All these features are integrated into the program.
To activate via LAN, the TAP interface can not be used to install and activate by the address of a computer in the network.
If you reconfigure the program and stop operating correctly – check the “Reset the program” box. All settings will default.
Command Line Parameters:
-Port <Port Value> – KMS Port. Range 1 to 65535
-PWin <PID> – Windows PID
-PO14 <PID> – Office 2010 PID
-PO15 <PID> – Office 2013 PID
-AI <Interval> – Activation Interval. Range 15 to 43200 minutes
-RI <Interval> – Renewal Interval. Range 15 to 43200 minutes
KillProcessOnPort – Force open the KMS Port if it is present.
-Log – Log file Enabled.
-IP – Displays the IP addresses of the Client Computers.
Hwid <HWID> – Machine Hardware Hash.
* The program requires .NET Framework 4.5
To run properly, you need to add the KMSSS.exe file to your antivirus exclusions! Or disable the antivirus during the activation process.
Sometimes the KMS-Service is not installed properly, due to different reasons.
You will need to do 2 or 3 times “Remove KMS-Service” and reboot your computer.
When working with the program it makes sense to check the option “Save settings in the
Carpteta of the program “. In this case, the configuration file will be stored in
The program folder, and not in C: UsersusernameAppDataLocalMSfree Inc.
Previous versions of KMS Log Analyzer.xlsm are incompatible with KMS Server Service v1.1.7
In order to keep the old records should be transferred to the new
KMS Log Analyzer using the copy-paste function.
I want to thank mikmik38, without his work this program would have been practically impossible.
A hotbird64, for its KMS Client, Evgeny972 and forum.ru-board.com friends to do
Possible assistance and testing of multiple versions of the program.
KMSAuto Net 2016 v1.4.9
Password : www.tecmaxsoft.com